In Development
See what we are preparing, help choose what comes next, or submit an idea of your own.
Project actions depend on the status shown. Supporting an idea is free; First Edition purchases open only with published terms.
Projects in development
Studio original
Dragon dildo
Ardor is a dragon dildo cast in platinum-cured silicone: an extreme-length tapered shaft you take inch by inch, scale texture you can feel under your fingers, and a horned orb at the base to anchor it. Four sizes, S to XL, in two colorways. Supporters asked for it, and the mold is now being made. The First Edition is a pre-order, charged when you order and limited to 10 pieces across all sizes.
· Sold out
First Edition colorway
Regular edition
Ardor is a dragon dildo cast in platinum-cured silicone: an extreme-length tapered shaft you take inch by inch, scale texture you can feel under your fingers, and a horned orb at the base to anchor it. Four sizes, S to XL, in two colorways. Supporters asked for it, and the mold is now being made. The First Edition is a pre-order, charged when you order and limited to 10 pieces across all sizes.
Keeping the scale detail and the slow taper intact from the digital sculpt to the final cast, so the depth is something you ease into rather than a stretch you fight.
Studio original
Realistic condom-play concept
Milked is cast in one piece, two colors: a realistic shaft topped with a sculpted cream condom — half rolled, filled, flopping over the way it does the moment he finishes. The tip is soft enough to drape and swing with every stroke, while the shaft stays firm and realistic, with a full base. Once 30 people sign up, we cut the mold, and it is cast in platinum-cured silicone.
Gathering interest — target 30
Milked is cast in one piece, two colors: a realistic shaft topped with a sculpted cream condom — half rolled, filled, flopping over the way it does the moment he finishes. The tip is soft enough to drape and swing with every stroke, while the shaft stays firm and realistic, with a full base. Once 30 people sign up, we cut the mold, and it is cast in platinum-cured silicone.
Two-tone casting in a single pour — the soft drape of the condom tip and the firm realistic shaft, seamless in one piece.
Support is free and creates no order. At 30 supporters, we cut the mold, and a limited First Edition opens for pre-order.
First Edition colorway
Regular edition
Studio original
Realistic dildo concept
Dorian is a realistic form, digitally sculpted: a natural upward curve, sculpted surface detail you feel on entry, and a full base with sculpted testicles. Planned in four sizes. Once 30 people sign up, we cut the mold, and it is cast in platinum-cured silicone.
Gathering interest — target 30
Dorian is a realistic form, digitally sculpted: a natural upward curve, sculpted surface detail you feel on entry, and a full base with sculpted testicles. Planned in four sizes. Once 30 people sign up, we cut the mold, and it is cast in platinum-cured silicone.
Keeping the sculpted surface detail and the natural curve intact from the digital sculpt to the final cast.
Support is free and creates no order. At 30 supporters, we cut the mold, and a limited First Edition opens for pre-order.
First Edition colorway
Regular edition
Community concept
Realistic dildo concept
Coronath began with a community member who already owned one of our toys and loved it. Their request: keep that shape and its proportions, scale the thickness up evenly, turn the curve slightly downward, and add a scrotum and realistic coloring. Across several rounds of sketches they asked for a slightly more pointed head and a little more fullness just behind it. After the first model, they flagged two things that looked real but would feel wrong: too sharp a step from head to shaft, and folds under the head that ran too deep. We agreed. The design now keeps the realistic look with a softer, wider transition from head to shaft and shallower folds, a straight shaft with a slight downward turn, a full scrotum and a flared base. One size, flesh tone with a deeper head. Once 30 people sign up, we cut the mold, and it is cast in platinum-cured silicone.
Idea from the community · shaped and modeled by the studio
Gathering interest — target 30
Coronath began with a community member who already owned one of our toys and loved it. Their request: keep that shape and its proportions, scale the thickness up evenly, turn the curve slightly downward, and add a scrotum and realistic coloring. Across several rounds of sketches they asked for a slightly more pointed head and a little more fullness just behind it. After the first model, they flagged two things that looked real but would feel wrong: too sharp a step from head to shaft, and folds under the head that ran too deep. We agreed. The design now keeps the realistic look with a softer, wider transition from head to shaft and shallower folds, a straight shaft with a slight downward turn, a full scrotum and a flared base. One size, flesh tone with a deeper head. Once 30 people sign up, we cut the mold, and it is cast in platinum-cured silicone.
Keeping the shape they loved while the head-to-shaft transition stays soft enough to be comfortable, from the digital sculpt to the final cast.
Support is free and creates no order. At 30 supporters, we cut the mold, and a limited First Edition opens for pre-order.
First Edition colorway
Regular edition
Community conceptby Joker712
Realistic BBC sleeve concept
Joker712 came to us with a complaint we kept hearing: most sleeves come in standard, smallish sizes and barely make you any thicker, and the big ones go soft and floppy. Their idea was a realistic BBC (Big Black Cock) sleeve in deep espresso skin, soft outside and tight inside. We had just developed a two-layer build that fit, so we started there. Along the way they chose a clean shaft with no balls, easier to wash, store and wear with a harness, and suggested the soft outer layer wrap the entry in a rolled rim so no firm edge touches you. After the first model they asked for a fuller belly, softer skin detail, a subtle grip pattern inside the tunnel and a smoother taper toward the base. All four are in. A small air vent at the tip didn't make it: it can't be made reliably in this build. The result is a thick belly that you feel on every stroke, a slightly tapered head for an easy start, and a soft matte skin over a firmer inner tunnel that runs narrower than you, so it stretches on and holds tight. One colorway, three sizes, S to L. Whether the layers are fused, sliding, or both is decided by support and sample tests. Supporters asked for it, and the mold is now being made.
Idea by Joker712 · shaped and modeled by the studio
Supporter count updates when available.
Joker712 came to us with a complaint we kept hearing: most sleeves come in standard, smallish sizes and barely make you any thicker, and the big ones go soft and floppy. Their idea was a realistic BBC (Big Black Cock) sleeve in deep espresso skin, soft outside and tight inside. We had just developed a two-layer build that fit, so we started there. Along the way they chose a clean shaft with no balls, easier to wash, store and wear with a harness, and suggested the soft outer layer wrap the entry in a rolled rim so no firm edge touches you. After the first model they asked for a fuller belly, softer skin detail, a subtle grip pattern inside the tunnel and a smoother taper toward the base. All four are in. A small air vent at the tip didn't make it: it can't be made reliably in this build. The result is a thick belly that you feel on every stroke, a slightly tapered head for an easy start, and a soft matte skin over a firmer inner tunnel that runs narrower than you, so it stretches on and holds tight. One colorway, three sizes, S to L. Whether the layers are fused, sliding, or both is decided by support and sample tests. Supporters asked for it, and the mold is now being made.
Keeping the belly thick and the tunnel tight, so the sleeve looks big and still holds on, from the digital sculpt to the final cast.
This project's current stage is shown above. You can still count yourself in.
Regular edition
Community conceptby Thor
Seahorse-inspired short, wide dildo
Thor came to us with a clear need: real width, without the length. Most big toys get big by getting long, and length was the part they couldn't use. The idea came from the seahorse: a body built from stacked rings that swells and narrows again. Thor gave us the proportions: a smaller head, the widest point low on the shaft, then a closing-in just above the base. They also told us what mattered most: smooth rings that stretch you a little every time one passes. So that is what we built. A rounded head eases you in. Smooth raised rings run the whole shaft, widening toward the lower third and closing in again at the base, so your body settles around it at the end. The seahorse's curled tail became two spiral-shell forms on a flat, flared base. Thor has seen the renders and likes it. We plan at least four sizes. The largest keeps the full width Thor asked for; the other sizes depend on the interest we collect here. Two-tone. Once 30 people sign up, we cut the mold, and it is cast in platinum-cured silicone.
Idea by Thor · shaped and modeled by the studio
Gathering interest — target 30
Thor came to us with a clear need: real width, without the length. Most big toys get big by getting long, and length was the part they couldn't use. The idea came from the seahorse: a body built from stacked rings that swells and narrows again. Thor gave us the proportions: a smaller head, the widest point low on the shaft, then a closing-in just above the base. They also told us what mattered most: smooth rings that stretch you a little every time one passes. So that is what we built. A rounded head eases you in. Smooth raised rings run the whole shaft, widening toward the lower third and closing in again at the base, so your body settles around it at the end. The seahorse's curled tail became two spiral-shell forms on a flat, flared base. Thor has seen the renders and likes it. We plan at least four sizes. The largest keeps the full width Thor asked for; the other sizes depend on the interest we collect here. Two-tone. Once 30 people sign up, we cut the mold, and it is cast in platinum-cured silicone.
Keeping the ring shape and the smooth glide true across every size we make, from the digital sculpt to the final cast.
Support is free and creates no order. At 30 supporters, we cut the mold, and a limited First Edition opens for pre-order.
Regular edition
How It Works
Supporting a project is free and takes one email. Oieffur still owns the design, safety, production and delivery decisions.
Studio originals and community concepts are both here. Open a project to see its details.
One email counts once per project. It is free, and it is not a purchase or a commitment.
When a design reaches 30 supporters, we cut the mold, and a limited First Edition opens for pre-order. Interest stays open at every stage, and each email still counts once.
Projects that continue, stop or complete are recorded honestly on their own cards.
If your concept enters development, you name the finished design — and the first piece is yours, free. Clear words are enough to start.
Submit an idea
This store sells adult products. Confirm you are 18 or older to enter.
By entering you confirm you are of legal age in your region.
Newsletter
You're subscribed.
Thank you. New products, restocks and occasional updates from Oieffur will now reach your inbox.
Newsletter
15% off your first order
Leave your email and the code arrives in our welcome email. After that, you hear when new pieces leave the bench and when sizes come back in stock.
Unsubscribe any time.